Parameter
Model: WS2812B 144 pixels LED strip
light source: 5050 RGB LED
Led Qty: 144pcs per meter
Wave length(NM):R,650nm ; G,520nm ; B,460nm
IC Model: WS2811 IC built in 5050 SMD
The gray level: 256
View angle:120°
Color: full color (24-bit )
Voltage: DC 5V
Power: 0.3W ± 0.01% per LED
Waterproof: Not waterproof IP20
FPCB board color: White
Dimension: 1000*12*3mm
Life span:≥50000hrs

Kindly note
1) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.
2) The LED strip comes with 3-pin JST SM connector on each end and separated power/ground wires, which makes it easy to wire up for power. These strips are sold by the meter!
3) There is a joint point in the middle of the strip and the LEDs are not perfectly spaced at that point. It’s just a tradeoff with the ability of the flex PCB maker and density. In fact, most if not all of the LED strips are manufactured in half-meter lengths.
4) Search “ALITOVE” on Amazon for other styles and items offered by ALITOVE.

Package:
1x 3.2ft 144 pixels WS2812B led strip (Power supply and controller are not included)

Related product links

5V 10A Power supply:
https://www.amazon.com/dp/B01M0KLECZ

SP105E Bluetooth Magic LED Controller:
https://www.amazon.com/dp/B01LW1J10W

SP103E Mini Wireless RF Remote Controller:
https://www.amazon.com/dp/B01HCHHM04

T1000S LED Controller:
https://www.amazon.com/dp/B01M4IX5FF

WS2812B addressable LED Strip kit:
https://www.amazon.com/dp/B01MDQBNUM

WS2811 LED pixels string:
https://www.amazon.com/dp/B01AG923GI

Product Features

• 256 brightness display and full 24-bit color display. Each pixel can have its own color and brightness. One pixel IC control one 5050 RGB LED.
• Compatible well with Arduino, FastLED library, Raspberry Pi and so on. It works almost the same as NeoPixel but much cheaper than NeoPixel.
• Comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
• Comes with 3-pin JST-SM connectors on both ends. Each LED can be cut off without damaging the rest strip. So you can shorten, lengthen or bend it freely.
• Can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, wedding party decoration, and so on.